Rear panel connections – NewHank Playmate User Manual

Page 7

Advertising
background image

REAR PANEL CONNECTIONS

Figure 3

34.

CHANNEL 1: PHONO 1/AUX 1 SWITCH --This switch presets this input to

phono or line level.

35.

CHANNEL 1: PHONO 1/AUX 1 INPUT – Turntables, CD players, Tape

decks or other line level

sources can be connected to these jacks. The red colored RCA jack represents the right channel input

and the white jack the left channel input.

36. CHANNEL 1: LINE 1 INPUT -- Do not connect turntable’s to these jacks. CD players, Tape decks or

other line level sources may be connected. The red colored RCA jack represents the right channel
input and the white jack the left channel input.

37. CHANNEL 2: PHONO 2/AUX 2 SWITCH -- This switch presets this input to phono or line level.

38.

CHANNEL 2: PHONO 2/AUX 2 INPUT -- Turntables, CD players, Tape Decks or other line level

sources can be connected.

39. CHANNEL 2: LINE 2 INPUT -- Do not connect turntable’s to these jacks. CD players, Tape decks or other
line level sources can be connected to these jacks.

40.

CHANNEL 3: AUX 3 INPUT -- Do not connect turntable s to these jacks.

CD players, Tape decks or other line level sources can be connected here.

41. CHANNEL 3: LINE 3 INPUT -- Do not connect turntable’s to these jacks. CD players, Tape Decks or other

line level sources may be connected to these jacks. The red colored RCA jack represents the right channel
input and the white the left channel input.

42. CHANNEL 4: LINE INPUT --Do not connect turntable’s to these jacks. CD players, Tape decks or other
line level sources can be connected to these jacks.

43. CHANNEL 3: LINE 3 INPUT JACKS -- Do not connect turntables to these jacks! CD players, Tape

Decks and other line level sources can be connected to these jacks. The red colored RCA jack
represents the right channel input and the white the left channel input.

44. MIC INPUTS -- Connect microphones to these inputs.
45. ZONE LEVEL OUTPUT - - Use this output signal to drive a booth monitor or separate sound

system. The output level for these jacks is controlled by the Zone volume knob(16).

46. PFL/ZONE OUTPUT -- a pre-fader post EQ signal can be send via the PFL buttons (3).

47.

RCA MASTER OUTPUT -- Unbalanced stereo output for short cable runs.

48.

XLR MASTER OUTPUT -- Balanced stereo output for short and long cable runs.

49.

IEC POWER SOCKET -- Connects to mains with the supplied power-cord.

page 7

NEWHANK

www.newhank.com

Playmate Instruction Manual

Advertising