Olson Technology OTOHP-NMS User Guide - Manual (Page 33)

Model OTOHP-NMS User Guide, Rev. X1 www.olsontech.com
33
OTOHP-PS Power Supply Module
This screen displays the status of the OTOHP-PS power supply module(s).
Alarm codes are displayed in trap and message form as shown below. The user is not allowed to change any of these
parameters remotely.
Code Description
001 DC Out Low (less than 22.8V)
002 DC Out High (great than 25.2V)
003 Fan Alarm
004 Module Temperature High (great than 85°C)
When the value is out the range of meter, double click the meter to change scale. When the window is closed, the system
will save the new scale settings as the default.