Preface, About this guide – OpenEye OE4 N-Series User Manual
Page 11
29205AC
11
PREFACE
ABOUT THIS GUIDE
This manual is a setup and maintenance guide that can be used for reference when setting up the N1 and N3 NVR and for
troubleshooting when a problem occurs. Only authorized personnel should attempt to repair the NVR.
OpenEye reserves the right to make changes to the NVRs represented by this manual without notice.
The following text and symbols mark special messages throughout this guide:
Note
Text set off in this manner indicates topics of interests that can help the user understand the product better.
Tip
Text set off in this manner indicates topics and points of interests that can be helpful when using or settings up the NVR.
TECHNICIAN NOTES
Warning Only authorized technicians trained by OpenEye should attempt to repair this NVR. All troubleshooting and
repair procedures that may be shown are for reference and minor repair only. Because of the complexity of the individual
components and subassemblies, no one should attempt to make repairs at the component level or to make modifications
to any printed wiring board. Improper repairs can create a safety hazard. And any indications of component replacement
or printed wiring board modifications may void any warranty
Warning To reduce the risk of electrical shock or damage to the equipment:
•
Do not disable the power grounding plug. The grounding plug is an important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
•
Disconnect the power from the computer by unplugging the power cord either from the electrical outlet or the
computer.
Caution To properly ventilate your system, you must provide at least 3 inches (7.6 cm) of clearance at the front and
back of the NVR.