Upgrade firmware, System setup continued – OpenEye OE3 E-Series User Manual

Page 29

Advertising
background image

29716AG

29

System Setup Continued

Use DST

–

After completing the Time Zone setup, highlight

USE DST

and press ENTER to

turn Daylight Saving Time ON / OFF.

NTP Type

– Highlight

NTP

(Network Time Protocol) and press ENTER to sync the recorder

with the network time.

Keypad Beep

-

ON / OFF

[Enables / Disables Audible keypad touch confirmation].

Auto Log Off

–

OFF

or

1-10

Minutes [This feature will close the Setup Menu after XX

minutes of inactivity. This is a security feature.]

S/W Upgrade

– Start firmware upgrade from selected media (

USB

or

CD/DVD

).

Upgrade Firmware

1.

Press SETUP on the front panel or remote control.
or
Click

MENU

on the hover menu and select

SETUP

.

2.

Select

SYSTEM > SYSTEM SETUP

.

3.

Click

S/W UPGRADE

to open the

UPGRADE FIRMWARE

window.

4.

Insert the

CD/DVD

or USB device.

5.

Click

SCAN

.

6.

Select the media type (

DVD/CD-ROM

/

USB HDD/STICK

).

7.

Click

OK

to start the upgrade.

Advertising