OpenEye CM-511 Installation Manua - Manual (Page 32)

32
3. Block the cable entry hole with the supplied
sponge.
4. Attach the Wall Mount Bracket to the wall with
the appropriate screws and screw anchors (not
provided).
5. Attach the Waterproof Gasket to the Wall Mount
Bracket.
6. Thread the cables through the top holder and
attach the dome to the Wall Mount Bracket with
the supplied screws and washers.
7. Connect the cables to the dome camera.
8. Attach the dome to the top holder and secure
them with the supplied screw.