Operation of your wine cellar, Control panel – Orien FSW-120 User Manual

Page 5

Advertising
background image

Use of Extension Cords
Avoid the use of an extension cord because of potential safety
hazards under certain conditions. If it is necessary to use an
extension cord, be sure to use only a 3-wire extension cord
that has a 3-blade grounding plug. Use a 3-slot outlet that will
accept the plug. The marked rating of the extension cord must
be equal to or greater than the electrical rating of the
appliance.

Operation of Your Wine Cellar

Do not plug in the wine cellar for 24 hours after unit is set in
place. Failure to do so may result in the unit working
improperly.

Plug in the wine cellar to turn it on. The COMPRESSOR ON
Indicator LED on the control panel will light, and will remain lit
while the compressor is operating.

Control Panel

Shows temperature inside cellar

(Temperature range : 0 - 99ºF)

Adjust temperature

setting up

COMPRESSOR ON

Indicator

RUN

ºF

ºF

DISPLAY

TEMP SET

UP

DOWN

Temperature setting

(Temperature range : 46 - 64ºF)

Adjust temperature

setting down

Set the desired cooling temperature by pressing the arrow
keys up or down. (Settings range from 46ºF to 64ºF.) The
temperature you set will be shown in the TEMP SET window of
the control panel. The actual temperature inside the unit will
appear in the DISPLAY window. This temperature will vary

4

Advertising