Drolet 75281 - Manual (Page 7)

6
BRICKS AND INSULATION INSTALLATION (HT-1600)
1. Remove from the stove all bricks and insulation.
2. Install all side bricks (11 x 4 1/2" x 9" & 1 x 4 ½” x 8 3/16") as shown in drawing below.
3. Install the back bricks (6 x 4 1/2" x 9")
4. Install the bottom bricks (4 x 4 1/2" x 9") + (2 x 6 " x 8") and the ash cap.
5. Install the "T" shape support.
6. Install the baffle bricks (4 x 4 1/2" x 9") + (2 x 3" x 9") on T shape support.
7. Finally, gently slide the insulation panels over the baffle bricks.
Nbr. Description Qty
1 1 ¼” x 4 ½” x 9” 25
2 1 ¼” x 4 ½” x 8 3/16" 1
3 1 ¼” x 6” x 7" 2
4 ASH CAP (SE09224) 1
5 1 ¼” x 3” x 9" 2
6 ISOLATOR (9 ½" x 12" ) 2
7 SUPPORT (SE09242) 1
Figure 2: HT-1600 Refractory Bricks Assembly