Pacific Cycles Handy - Manual

Recumbent/Upright
Owner manual
Handy Recumbent Assembly Procedures
Step 1:
Take out all parts in the box: (1) seat assembly
(seat chasis, cushion pad, seat fabric support),
(2) rear wheels x 2, (3) front frame assembly,
(4) foot rest assembly, (5) main frame and (6)
flag.
Step 7:
Important Safety Checklist!
Check and make sure that all clamps and QR are properly tightened.
Always wear a helmet and abide by all traffic regulations and courtesies!
Important Maintenance Checklist!
1st service inspection after at most 300 km or at latest one months after purchase,
repeat every 3 months.
Parts need lubrication: chain, headset, bearings.
Parts prohibit lubrication: seatpost, seat tube, adjustable stem, rims.
Repeat lubrication every half month or after at most 150 km ride.
Apply lubrication immediately after washing or riding in rainy day. Copyright 2014
Accessories:
Upper left to lower right (7) seat belt, (8) fixing
plate w/bolts for foot rest and rear axle, (9) foot
rest velcro strap x 2, (10) shifter instruction, (11)
rear wheel axle and hub cap x 2, (12) paint bottle,
(13) steering spring set and (14) semicircle main
frame fixing plate and clamp set.
Step 2:
Assemble the
hand pedals,
gear shifter
at right.
Step 3: Step 4: Step 5:
Step 6:
Assemble the rear axle to the
main frame.
Insert the skewer thru the rear
hub and into the rear axle, put
on the hub cover.
Assemble main frame to front
frame assembly, clamp top
and bottom.
Turn the front wheel left and
insert the spring set, turn the
wheel back and tighten.
Assemble the foot rest and apply the velcro
strap.
Step 8:
Assemble the seat chasis to the
main tube at the desired position
and tighten all bolts.
Step 8 (cont’d):
Apply the seat fabric support, seat belt and cushion pads.
686, Yongfu Rd., Yong An,
Xinwu, Taoyuan 327, Taiwan
Tel: +886-3-4861231 Fax: +886-3-4861215
Web: http://www.pacific-cycles.com
Email: [email protected]
Step 9:
Set up the red flag and you are
ready to go. Before riding, make sure
all bolts are properly tightened.