Philco PHJE 5020 - Manual (Page 7)

5 Revision 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
3) Install the strainer (6) into the separator (5) (fi g. 3).
Fig. 3
4) Place the strainer (6) with the separator (5) into the juice collector (4) so that
the marks on the strainer and the motor unit (2) are aligned (fi g. 4)
Fig. 4
5) Insert the screw (7) into the strainer (6) so that the screw is fully in place
(fi g. 5)
Note: When installing the screw, never exert brute force. If necessary, turn it
slightly.
Fig. 5