Digital Camera Battery SD20 - Manual (Page 123)

121
Conn
e
c
ting
the Cam
e
ra
to a Co
mputer
If the event dialog fails to appear, click the [Start] menu, and select
[Programs] or [All Programs], followed by [Canon Utilities], [Camera
Window] and [Camera Window].
• To connect the interface cable to the camera's DIGITAL terminal, lift
the terminal cover with a fingernail under its upper edge and insert
the connector until it clicks into place.
• Always grasp the connector’s sides to remove the interface cable
from the camera's DIGITAL terminal.
3 Set the mode switch to (Playback).
4 Press the ON/OFF button until the power lamp lights green.
5 Select [Canon CameraWindow] in the event dialog that
appears on the computer and click [OK] (first time only).
• Windows:
Proceed to step 5 below.
• Macintosh:
Refer to the Software Starter Guide and download images.