Security menu – Dukane Projector 8794H-RJ User Manual

Page 74

Advertising
background image

74

SECURITY menu

This projector is equipped with security functions.

From the SECURITY menu, items shown in the table

below can be performed.

To use SECURITY menu: User registration is required

before using the security functions.

Enter to the SECURITY menu

1. Press the ► button. The ENTER PASSWORD box will be displayed.

2. Use the ▲/▼/◄/► buttons to enter the registered password.

The factory default password is as follows.

3692
This password can be changed

(below)

. Move the cursor to

the right side of the ENTER PASSWORD box and press

the ► button to display the SECURITY menu.

• It is strongly recommended the factory default password to be

changed as soon as possible.

• If an incorrect password is input, the ENTER PASSWORD box

will be displayed again. If incorrect password is input 3 times, the

projector will turn off. Afterwards the projector will turn off every time

an incorrect password is input.

3. Items shown in the table below can be performed.

If you have forgotten your password

(1) While the ENTER PASSWORD box is displayed, press and hold the

RESET button on the remote control for about 3 seconds or press

and hold the

INPUT button for 3 seconds while pressing the ►

button on the projector.

(2) The 10 digit Inquiring Code will be displayed. Contact your dealer

with the 10 digit Inquiring Code. Your password will be sent after

your user registration information is confirmed.

• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will

close. If necessary, repeat the process from (1).

Item

Description

SECURITY

PASSWORD

CHANGE

(1) Use the ▲/▼ buttons on the SECURITY menu

to select SECURITY PASSWORD CHANGE

and press the ► button to display the ENTER

NEW PASSWORD box.

(2) Use the ▲/▼/◄/► buttons to enter the new password.

(3) Move the cursor to the right side of the

ENTER NEW PASSWORD box and press the

► button to display the NEW PASSWORD

AGAIN box, enter the same password again.

(4) Move the cursor to the right side of the NEW

PASSWORD AGAIN box and press the ►

button and the NOTE NEW PASSWORD box

will be displayed for about 30 seconds, please

make note of the password during this time.

Pressing the

ENTER button on the remote control or ► button on the

projector will close the NOTE NEW PASSWORD box.

• Please do not forget your password.

(continued on next page)

SECURITY menu

Advertising
This manual is related to the following products: