REMKO GTF-5 - Manual (Page 2)

2
Description of Device
G The temperature control may only be connected using the
7-pole plug of the GPA-C heater intended for this purpose.
A temperature control is used for the unit functions heating, ventilating
and resetting of the heater.
Power connection, unit operation and burner malfunction are displayed
by the control lights.
Day and night temperatures can be set separately via the respective
thermostats. The integrated weekly clock timer (TIMER with power re-
serve) lets heating operation be pre-programmed for the week.
The temperature control is ready for plug in and is supplied with a 6 m
long control cable incl. 7-pole plug. This is connected at the back of the
heater to the appropriate slot.
G
A temperature control can only be used to control a single heater.
The REMKO GTF-5 temperature control is a combination of a remote
control and an automatic day/night temperature control for the heaters in
the GPA-C series.
Day thermostat
Night thermostat
Temperature sensor
Timer
Operating switch
Reset button Operating light Malfunction light
Power control light
Mode selector