REMKO Multi-talent - Manual (Page 15)

Plant
Designation Value range Factory setting Description
Operating mode /
Operating mode
Standby
Cooling
Automatic 1+2
Summer
Heating
Reduction
Service
Standby
Setting the operating mode / the operating mode for the
system.
• Standby (heating OFF, water heating OFF,
only frost protection).
• Cooling (heating OFF, only water heating, activation of
the cooling machines, regulation of the heating circuits to
T-supply cooling).
• Automatic 1+2 (heating in accordance with the
heating programme 1/2, WW in accordance with WW-
programme).
• Summer (heating OFF, WW in accordance with WW-
programme).
• Heating (regulation to T-room target).
• Reduction (regulation to T-reduction).
• Service (Controller to Max T-WE,
see Specialist
Cascade
The service mode automatically returns to the
previous operating mode after 15 min..
Language D/GB/F/NL/E/I English Setting the language for the controller.
LCD contrast 00-06 04 Setting the display intensity.
LCD brightness 00-30 30 Setting the display lighting brightness.
°C/°F
Celsius
Fahrenheit
Celsius Setting the temperature unit.
Summary of settings that can be set by the system operator.
Plant
End 01
Operating mode
Language
LCD contrast
LCD brightness
°C/°F
Hot water
End 01
1 x hot water
T-WW 1 target
T-WW 2 target
T-WW 3 target
BoB value
Circ with WW prog
Anti-legionella
USER
Heating circuit 1
End 01
Operating mode
T-room target 1
T-room target 2
T-room target 3
T-reduction
T-absent
T-room cooling
T-external cooling
Heating threshold day
Heating threshold night
heating curve
T-supply const T
T-supply const N
Room impact
Heating curve adaptation
Warm up opt
Max warm up-time
Reduction opt
PC enable
Heating circuit 2
End 01
Operating mode
T-room target 1
T-room target 2
T-room target 3
T-reduction
T-absent
T-room cooling
T-external cooling
Heating threshold day
Heating threshold night
heating curve
T-supply const T
T-supply const N
Room impact
Heating curve adaptation
Warm up opt
Max warm up-time
Reduction opt
PC enable
Level 4 - USER - Description of parameters and settings
See page 15
See page 16
See page 16-19 See page 16-19
15