Rena EasyFeed 120 - Manual (Page 11)

EasyFeed_120_Operations_
4-25-14
11
SETTING THE PAPER GUIDES
The paper guides can be adjusted laterally by loosening the locking lever on the paper guide
block and sliding the guide into position.*
When running narrow stock, when all feed belts are not required, the paper guides can
be raised to slide over the belts, and repositioned between feed belts.
STEP 1. Loosen each paper guide locking lever and slide the paper guides outward
toward the edges of the feeder.
The width of your document should dictate how many of the feed belts you use. You will
position the appropriate amount of belts between the paper guides. Here are a few common
document sizes, along with the appropriate number of belts to use:
•
Trifold pieces and #10 envelopes -- 2 belts and 1 separator
•
5 ½” wide self mailers or postcards -- 3 belts and 2 separators
•
8 ½” wide documents -- 4 belts and 2 separators
Examples of setup for different size documents are shown later in this manual.
Locking
lever
Guides can be raised to
slide over belts