RGBLink New Driver 2 Quick Start - Manual (Page 11)

Address：S602-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
10
Set the horizontal card, vertical card, width and height. For example, set horizontal card as 2, vertical
card as 3, width and height as 120, shown as follows:
After setting, push MENU to return the previous menu, choose [CONNECT CARD TYPE] according to
actual connection mode. New Driver 2 support 8 kinds of connection modes, they are , , ,
, , , and respectively.
SENDING CARD NO.1
CHOOSE NETWORK PORT U
SENDING CARD SET >>
>RECEIVING CARD SET >>
> HORIZONTAL CARD 2
VERTICAL CARD 3
WIDTH 120
HEIGHT 120
CHOOSE NETWORK PORT U
D TO U OFFSET X 0
D TO U OFFSET Y 0
> CONNECT CARD TYPE >>