RGBLink DXP D1616 User Manual User Manual
Dxp d1616, User manual
Advertising
Table of contents
Document Outline
- CONTENT
- 1. Brief Introduction
- 2. Hardware Orientation
- 3. Hardware Installation
- 4. Menu Orientation
- 5. Communication Software Guideline
- 6. System Setup and Operations
- In This Chapter
- How to Switch between Input and Output Channel
- How to Switch One Input to all Outputs
- How to Read Device Status
- How to Set LOGO Display when Power on
- How to Set the EDID
- How to Set the Language
- How to Realize Cascade Setting
- How to Set the Machine Address
- How to Realize Signal Auto Take
- How to Lock the Front Panel
- How to Realize Hot Backup
- How to Save the Preset Input and Output Channel
- How to Load the Saved Input and Output Channel
- How to Reset the Factory Settings
- 7. Common Questions and Solutions
- A. Specification
- B. Contact Information
- C. Software Upgrade
- D. Serial Communication Protocol