RGBLink DXP D1616 User Manual - Manual (Page 56)

6. System Setup and Operations
How to Set the EDID
DXP D1616 User Manual 56
How to Set the EDID
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and
choose [EDID].
3. Push the [TAKE] button to confirm.
4. Push any button on output area on the front panel, for example,
choose [3] as the output channel.
5. Push any button on Input area on the front panel, for example,
choose [5] as the input channel.
6. Push the [TAKE] to confirm, and the EDID copy finish.
Note
When set the EDID, the output interface must be
connected to monitors.
FROM:
TO:
—>STATUS >>
RESET >>
LOGO >>
—>EDID >>
FROM: 3
TO:
FROM: 3
TO: 5