RGBLink DXP D1616 User Manual - Manual (Page 48)

5. Communication Software Guideline
How to Connect Windows Control Program by RS232 Interface
DXP D1616 User Manual 48
How to Connect Windows Control
Program by RS232 Interface
Firstly, install the control software in your PC.
Connect one end of RS232 cable to the DXP D1616, and the other end to
the serial port on the PC.
If there is no serial port in the PC, it needs the Serial to USB adapter.
Right click [My Computer] on the home screen of control PC. Enter to
[Attribute], Find [Hardware] option, as following.
Click [Device Manager] ―+‖ on the left, check the COM number, as following,
COM1 is offered.