RGBLink DXP D1616 User Manual - Manual (Page 64)

6. System Setup and Operations
How to Load the Saved Input and Output Channel
DXP D1616 User Manual 64
How to Load the Saved Input and Output
Channel
1. Push the [LOAD] button on the front panel, the button light is on. At the
same time, some buttons [1]~[16] in output and input area are on and
some flash. Button on is ready for recall, and button flashes means just
recall, shown as follows:
2. Push the button on to recall.
3. Push the [MENU] button to exit the load state, or push the [LOAD]
button, the button light is off, and exit the load state.
LOAD FROM: _