RGBLink Driver Quick Start - Manual (Page 10)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
9
Sending Card Installation
Driver controller equipped with a control panel, which compatible with different sending cards. Before
install the sending card, make sure choose the corresponding jumper cap and seal with glue. The
control panel shown in the figure below.
The following will instruct the sending card installation in detail, sending card types include DBstar,
Nova, Linsn and Colorlight.
1. DBstar Sending Card Installation
Before installation, user need to weld a needle that single row space 1.27 mm 9 pin in blue box, shown
as follows: