Power indicator light is off or blinks, Output images shake or cannot full screen display – RGBLink DXP D0404 User Manual User Manual
Page 28
Advertising
DXP D0404 User Manual 28
Power indicator light is off or blinks
1. Check whether plug in the power cord, and press the switch to "ON"
position.
2. Check whether the power cable is connected, and in good connection.
3. If above without problem, then the power indicator is damaged.
Output images shake or cannot full screen
Each corresponding read EDID file from output displays is different, and
cause the synthetic EDID file cannot be consistent with the EDID files from
display. Users can use the same type of displays from the same
manufacturer, or displays with the same EDID files.
Advertising