RGBLink MSP 221 User Manual - Manual (Page 24)

MSP 221 User Manual 24
3. Operation Manual
Program Area
Shown as follows:
Operation Manual
1. Power on, the 7 buttons will light one by one, and then all lights go out.
2. VGA+WRITE+SAVE1+RUN: Write EDID of VGA SAVE1 to VGA IN.
3. VGA+WRITE+SAVE2+RUN: Write EDID of VGA SAVE2 to VGA IN.
4. VGA+READ+SAVE1+RUN: Write EDID of VGA OUT to VGA SAVE1.
5. VGA+READ+SAVE2+RUN: Write EDID of VGA OUT to VGA SAVE2.
6. HDMI+WRITE+SAVE1+RUN: Write EDID of HDMI SAVE1 to HDMI IN.
7. HDMI+WRITE+SAVE2+RUN: Write EDID of HDMI SAVE2 to HDMI IN.
8. HDMI+READ+SAVE1+RUN: Write EDID of DVI OUT to HDMI SAVE1.
9. HDMI+READ+SAVE2+RUN: Write EDID of DVI OUT to HDMI SAVE2.
10. Push VGA+RUN for 2 to 4 seconds: Jump from Program Area to Boot Area.