Msp 217 tx sdi to fiber panel, 1：power interface, Indicator – RGBLink MSP 217 User Manual User Manual
Page 22: Sdi input interface, 5：usb interface, Hardware orientation
2. Hardware Orientation
MSP 217 TX SDI to Fiber Panel
MSP 217 User Manual 22
The figure below illustrates the professional interface and control signals
of MSP 217 SDI to Fiber panel:
1：Power interface
The device uses the standard 12V/1.5A power supply.
2.4.6: Indicator
Power indicator 2 lights when device has power supply.
LED indicator 4 is on when connect SDI cable and the device is in normal
Operation.
LED indicator 6 is on when connect USB cable and the device is in normal
Operation.
3: SDI input interface
SDI input interface，Can receive video signal from HD player, and HD
camera, connect interface 16 via 75 ohms impedance BNC port. Connect
LED screens via network cable.
5：USB Interface
Remote communication device control interface, used to connect to the
computer or console.