RGBLink VSP 5360 - Manual (Page 14)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
13
How to Load the Saved Parameter
Push the [Load] button, the button light is on, and enable the LOAD function.
Some of the number buttons 0-12 in PRE area are on, some flash and some are off. The buttons on is
ready for recall, and flashes means just recall. Push the button on to load.
User can also push the [MENU] button to enter the menu item, and choose <SYSTEM> option, turn the
knob and choose <RECALL>, push the knob to confirm. Turn the knob again, and choose the save
mode.