RLE 10K V.2.5.a - Manual (Page 13)

rletech.com SeaHawk 10K User Guide 13
C
H A P T E R
C HAPTER 0
I
NSTALLATION AND
C
ONFIGURATION
2.1. Prepare for Installation
To install the SeaHawk 10K, you’ll need following supplies:
Included with the SeaHawk 10K
♦ 15 foot (4.57m) leader cable
♦ End-of-line terminator (EOL)
Available from RLE, sold separately
♦ 12-24 VAC/VDC, 50-60Hz isolated power supply
♦ SeaHawk Sensing Cable, up to 10,000 feet (3048m)
♦ J-Clips
Available from other vendors
♦ Electrostatic discharge (ESD) protection
2.2. Physical Connection Overview
The SeaHawk 10K contains two circuit boards:
♦ The top circuit board houses operational controls and displays. SeaHawk 10K operational
information is found in Chapter 3.
♦ The lower circuit board houses the connectors for:
– AC/DC power
– Earth ground
– Relay output
– Leak detection cable
– Communications