Dodge 2004 Sprinter Carb & Chassis - Manual (Page 236)

236 MAINTAINING YOUR VEHICLE
Fog Lamp (Optional)
1. Remove the cable connector from the bulb holder.
2. Press both retaining springs in the direction of the
headlamps and then outward (in the direction of
the arrow).
3. Remove the bulb.
4. Put in the new bulb so that the retaining lugs on the
bulb holder are inserted into the recesses in the
bulb holder reflector section.
5. Secure both retaining springs.
6. Press on the cable connector.
7. Secure the housing cap.
Freightliner-all.book Page 236 Monday, December 1, 2003 2:54 PM