Seat belt warning lamp and airbag malfunction, Fastening and removing – Dodge 2004 Sprinter Carb & Chassis User Manual

Page 38

Advertising
background image

38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Seat Belt Warning Lamp and Airbag Malfunction

When the key is in position 2 in the ignition lock, the
warning lamp < lights up for about 6 seconds; this
takes place whether or not the driver’s seat belt is
fastened.

The warning lamp < must go out after about
6 seconds.

If the warning lamp < flashes after about 6 seconds,
the malfunction indicator lamp 1 is defective.

The fault should be repaired as soon as possible by an
authorized Sprinter Dealer.

NOTE:

When the key is turned to position 2 in the

ignition lock, a warning buzzer sounds for about
6 seconds if the driver’s safety belt is not pressed into
the belt buckle. The buzzer stops as soon as the safety
belt is fastened. Press the safety belt into the belt
buckle.

Fastening and Removing

Belt tongue (1)

Belt buckle (2)

Release button (3)

Freightliner-all.book Page 38 Monday, December 1, 2003 2:54 PM

Advertising