Daewoo DP-42WM - Manual (Page 44)

INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
Selecting INPUT SIGNAL
44
Press the INPUT SELECT Button.
INPUT
SELECT
• Press the [INPUT SELECT] button on the Remote Control or
the PDP Display to select [COMPONENT 1] or [COMPONENT
2].
• Each time you press the [input select] button, a different screen
mode appears. The sequence used is as follows:
COMPONENT 1 --> COMPONENT 2 --> VIDEO 1 --> VIDEO 2
1
NOTES:
* If an external device is not connected or INPUT signal is not
applied, Warning Message (“No Signal”) would be displayed.
* In this case, check if external device is connected and or
terminal connection is properly done.
INPUT
SELECT
POWER
DISPLAY
ZOOM-
PICTURE
MODE
SCREEN
MODE FREEZE
MUTE SOUND
MODE
SLEEP
ZOOM+
MENU
VOL VOL
PC
Component1
PC
Component2 Video1
Video2