Seaward DO5000 Interface - Manual (Page 37)

- 37 -
Data Operation Commands
DATAlogger:
CLEAr
COUNt <No. of readings>
COUNt?
STATe <ON|OFF> or <1|0>
STATe?
STARt
STOP
STEP
VALue? <value number|ALL>
POINts?
Mathematical Operation Commands
CALCulate:
DATA:MINimum?
DATA:MAXimum?
DATA:AVERage?
DATA:PTPeak?
DATA:SDEViation?
CALCulate:
LIMit:LOWer <value>
LIMit:LOWer?
LIMit:UPPer <value>
LIMit:UPPer?
LIMit:STATe <ON|OFF> or <1|0>
LIMit:STATe?
LIMit:ALARm <ON|OFF> or <1|0>
LIMit:ALARm?
Temperature Compensation Commands
SENSe:
TCOMpensate:STATe <ON|OFF> or <1|0>
TCOMpensate:STATe?
TCOMpensate:MODE <EXT> or <MAN,manual temperature>
TCOMpensate:MODE?
TCOMpensate:REFerence <temperature value>
TCOMpensate:REFerence?
TCOMpensate:COEFficient <CU|AL> or <USER,user coefficient >
TCOMpensate:COEFficient?
UNIT:
TEMPerature <C|CEL|F|FAR>
TEMPerature?
Filter (Averaging) Commands
SENSe:
AVERage:STATe <ON|OFF> or <1|0>
AVERage:STATe?
AVERage:COUNt <No. of readings>
AVERage:COUNt?