Seaward Supernova XE User Manual
Page 54
How to use Setup
44
Test Settings Editor
The Test Settings Editor allows the test sequence for the selected
test to be examined and changed if required:-.
Use the cursor keys to highlight a field to be changed and press
Enter to select the desired option.
Name
Each Sequence is given a name, this is to help the user when
selecting Sequences during automatic testing. When Name is
highlighted press the Enter button, then use the keyboard to enter a
new name for the Test Sequence (of up to 15 characters) and press
Enter to confirm.
Test Parameter Fields
By selecting one of the test parameter fields from the Test Settings
Editor, a list of options for that field will be displayed:-
---------------DEFAULT SEQUENCE EDITOR----------------
OUTPUT LIMIT DUR NUM
VISUAL
YES
1
EARTH BOND
4A 0.10
Ω 5 1
INSULATION
500V 0.50M
Ω 5 1
SUB LEAKAGE
SKIP
LEAKAGE
SKIP
TOUCH LEAKAGE
SKIP
POLARITY
SKIP
NAME: IT EQUIPMENT
TESTCODE 1: I0G2000122
TESTCODE 2: R222111111
PRINT TESTCODES
STORE SETTINGS