Dynex DX-32L151A11 - Manual (Page 15)

Turning on your TV for the first time
11
DX-32L151A11/DX-37L130A11
Connecting using a digital audio cable
To connect using a digital optical cable:
1 Make sure that your TV’s power cord is unplugged and the digital
audio system is turned off.
2 Connect one end of a digital optical audio cable (not included) to
the DIGITAL OUTPUT jack on the back of the TV.
3 Connect the other end of the audio cable to the digital optical
input jack on the digital audio system.
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
To play TV sound through a home theater system:
1 Turn on the TV and select a program to watch.
2 Turn on the home theater system and select the TV sound source,
then adjust the volume to a comfortable level.
Connecting headphones
Warning: When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
• Plug the headphones (not included) into the (headphone)
jack on the side of the TV.
Turning on your TV for the first
time
To configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected your devices to the TV, and connected the AC
power.
2 Press (Power), then wait several seconds. The initial Setup
Wizard screen opens (only the first time you turn on your TV).
3 Press or to select the menu language you want, then press
ENTER. The Time screen opens.
4 Press or to highlight Time Zone, then press or to
select your time zone. You can select Pacific, Alaska, Hawaii,
Atlantic, Eastern, Central, or Mountain.
5 If your viewing area observes daylight savings time, press or
to highlight DST, then press or to select On.
6 Press or to highlight Mode, then press or to select
Manual (to set the date/time manually), or Auto (the date/time
are automatically set by the TV signal source, based on the time
zone you selected).
7 If you select Manual mode, make the settings as follows:
• Press or to highlight Year, Month, or Day, then press
or to adjust the setting.
• Set the time by pressing or to highlight Time, then
press or to highlight the hour, minute, or AM/PM field.
Press or to adjust the setting.
8 Press ENTER. The Choose your Picture Mode screen opens.
Back of TV Digital sound system
Digital optical cable
AV
IN L
R
VID
EO
A U DI O
HDMI
2
SE
RV
ICE
P O R T
DX-32L151A11-37L130A11_10-0567.book Page 11 Tuesday, June 1, 2010 9:26 AM