Sierra Video Crestron E-Server 908012 - Manual (Page 17)

CRESTRON E-SERVER
11
From the Viewport Screen select Setup, Communications Settings.
From the Communications Settings window (Port Settings), select;
TCP/IP (Transmission Control Protocol/Internet Protocol) Check Fixed and enter the
IP address you used in the Ethernet Configuration screen.
Connect to a LAN cable.
Click OK. The E-Server should re-connect and give you a prompt. Once it connects,
verify communication by pressing “Enter” on the keyboard. You should get a prompt.
The bottom of the Viewport screen should say;
Port Settings: Connected to “xxx.xxx.xxx.xxx (your IP address)” on Port 41795 (Crestron
Terminal Protocol)
Disconnect the serial cable between the PC and the COM B of the E-Server.