Delta Faucet NANOTRACE DF-745 User Manual
Page 49
User Interface DF-745
45
7.4.5.2 View Location
Figure 36: View Location Screen
The view location function is used to view data previously stored in the system sorted by
location. On the Moisture Data Downloader screen Figure 35, use the Next key to move to
the list of existing names and then use the arrow keys (
and
to select the location
desired. Then use the Next key to move to View Location and press Enter. The View
Location screen will appear as in Figure 36.
Use the arrow keys (
and
to select the data block desired and use the Next key to
move to View Location and press Enter. The data history screen will appear as shown in
Figure 31. From the data history screen, the data may also be downloaded to a USB
memory stick.
7.4.5.3 Add Location
The user can create a new location stamp by moving the cursor to the Add Location
button and hitting enter. This brings up the keyboard shown in Figure 37 that is used to
enter the name of the new location.
Figure 37: Keyboard Display