Sloan ELC-41000 Installaton - Manual (Page 5)

5
1– STRAINER INSTALLATION
2B – WALL MOUNTING (OPTIONAL)
2A – VANITY MOUNTING
3 - INSTALL FAUCET, SENSOR, AND WATER LINE CONNECTIONS
DRAIN NUT
CARDBOARD SEAT
RUBBER GASKET
STRAINER
Measure and mark a level line on the wall at 5/8” below the desired
Basin height (this line is a guide for the top of all the brackets).
MOUNTING BRACKETS
Note: Wall mounting fasteners supplied by others.
Install faucet, sensor, and water line connections as instructed in the
installation instructions furnished with the Faucet.
A
A
B
A
B
B
C
D
E
F
A
B
Apply adhesive caulk to perimeter of vanity casework and corners of
deck.
With the help of another person, place the lavatory deck on vanity.
Measure and mark the Bracket locations as shown. Drill holes in the
wall using the Mounting Bracket as a template.
Install wall anchors that are specific for that type of wall: drywall,
concrete, metal studs, wood studs, etc. (supplied by installer). Some
wall materials will require additional reinforcement.
Secure Mounting Brackets to the wall. Use left and right Brackets as
required.
Note: Be sure Mounting Bracket is level and plumb against wall so
that Lavatory will drain correctly once assembly is completed.
FOR ELC SERIES – Apply adhesive to brackets and corners of lavatory
deck. With the help of another person, place the Lavatory on the
Mounting Brackets. Optional Step for ELB Series.
Caution: Do not leave lavatory on mounting brackets unsupported.
It may fall and cause damage or personal injury.
FOR ELB SERIES – secure Lavatory with the hardware provided through
the holes provided in the brackets.
Insert Strainer into Basin using plumbers putty (supplied by installer).
From beneath Basin, install the Rubber Gasket, Cardboard Seat and
Drain Nut onto Strainer. Secure Drain Nut against Basin.
WALL
P-TRAP
FLEX HOSE
STRAINER
WATER
SUPPLY
LINE
DRAIN
LINE
Install P-trap and drain lines making sure that all connections are
secure.
C Flush supply line(s) of any debris. Install Flex Hose(s) to water supply
line(s). Tighten fitting(s) securely.
Note: P-trap and drain lines furnished by others.