Sloan ELS-63000 Installaton - Manual (Page 4)

2 – MOUNTING WALL BRACKETS
2-1/2”
(64 mm)
1-1/4”
(32 mm)
7-1/2”
(191 mm)
“F”
SEE TABLE ON
PAGE 2
2-1/2”
(64 mm)
1-1/4”
(32 mm)
7-1/2”
(191 mm)
DISTANCE BETWEEN
BRACKETS
FINISHED FLOOR
FINISHED FLOOR
“F”
SEE TABLE ON
PAGE 2
DISTANCE
BETWEEN
BRACKETS - STEP 2B
DISTANCE
BETWEEN
BRACKETS - STEP 2B
DISTANCE BETWEEN
BRACKETS
1/4”-20 x 1/2”
TRUSS HEAD
SCREWS (6)
DISTANCE BETWEEN
BRACKETS
DISTANCE BETWEEN
BRACKETS
1/4”-20 x 1/2”
TRUSS HEAD
SCREWS (6)
2-1/2”
(64 mm)
1-1/4”
(32 mm)
7-1/2”
(191 mm)
“F”
SEE TABLE ON
PAGE 2
2-1/2”
(64 mm)
1-1/4”
(32 mm)
7-1/2”
(191 mm)
DISTANCE BETWEEN
BRACKETS
FINISHED FLOOR
FINISHED FLOOR
“F”
SEE TABLE ON
PAGE 2
DISTANCE
BETWEEN
BRACKETS - STEP 2B
DISTANCE
BETWEEN
BRACKETS - STEP 2B
DISTANCE BETWEEN
BRACKETS
1/4”-20 x 1/2”
TRUSS HEAD
SCREWS (6)
DISTANCE BETWEEN
BRACKETS
DISTANCE BETWEEN
BRACKETS
1/4”-20 x 1/2”
TRUSS HEAD
SCREWS (6)
A
Attach brackets to basin using 1/4”-20 x 1/2”
truss head screws.
B
Measure distance between brackets. Make
sure the carrier (when needed) can
accommodate the proper location for the
brackets.
C
Determine the appropriate location for the holes to secure the brackets to the wall. Use the following dimensions as a reference.
D
Mount basin and brackets to wall using fasteners with waster that hold over 1000 lbf (pounds-force) withdrawal load each.
1/4”-20 x 1/2” Truss Head Screw
(Actual Size)
Double Station
Triple Station
Double Station
Triple Station
NOTE: IF DESIRED, DETACH BRACKETS FROM BASIN AND MOUNT BRACKETS TO WALL FIRST. THEN
MOUNT BASIN TO BRACKETS USING 1/4”-20 X 1/2” TRUSS HEAD SCREWS. GRID STRAINER MAY BE IN-
STALLED PRIOR TO ATTACHING BASIN TO BRACKETS. REFER TO STEP 6.