Smart Avi CATSwitch - Manual (Page 19)

Controlling with IR
Switching Ports with Remote Control
You have the option of controlling the CATSWITCH via Remote Control. The PLAZOOM remote is
used to control the CATSWITCH. The SM-EYE must be connected to the CATSWITCH ( this is an op-
tional connector not always available in all boxes) in order to interface the remote control with the
matrix. The way the remote control the matrix is as follows:
Xx<enter>yy<enter>
When XX is the output , YY is the input
To change the routing of the signals,
For example, to set output 3 to input 2 press “0” + “3” + ENTER, then press “0” + “2” + ENTER. If a
wrong button is pressed, the user must either press the ESC button or wait 5 seconds before restart-
ing the sequence.
Chapter 3: Software Installation & Operation