Smart Avi CATSwitch - Manual (Page 6)

Chapter 2: Installation
Connecting XTAV transmitter
Connecting The Transmitter
Connect the output of the computer video card to the video input of the transmitter us- 1.
ing the included male to male video cable.
Connecttheoutputofthecomputeraudiocardtothe audio input of the transmitter using
2.
3.5mm audio male to male audio cable.
Connectexternalspeakerstothetransmitter’saudio out (Standard 3.5mm stereo miniplug).
3.
In the back of the unit connect the CAT5 cable that will connect to the receiver (XTAV- 4.
RX).