Dell H952N - Manual (Page 42)

42 |
Operation
Settings
Only available options are displayed.
User settings are not protected by default. You can enable the password through the User Password
setting.
Table 6 displays the options that can be changed by the user.
Table 6. Settings
Description Available Settings Default Setting
Change Language [English] [French] [German] [Spanish] [Japanese]
[Simplified Chinese] [Russian] [Korean]
[Traditional Chinese] English
User Password [Enabled] [Disabled]
If Enabled, the default password is USER.
NOTE: If you enter an incorrect password, the
message “Wrong Password” appears. Press any
button to return to the password screen and retry
the password.
Disabled
Audible Alarms [Enabled] [Disabled]
NOTE: If you disable audible alarms, it takes effect
instantly and remains disabled, even after a power
cycle. This differs from the mute feature where the
horn is temporarily silenced on any button press,
but turns on again if a new alarm is triggered.
Enabled
Set Date and Time Set Month, Day, Year, Hours, Minutes, and Seconds
Date: mm/dd/yyyy
Time: hh:mm:ss
NOTE: The date format is dependent on the
language selection.
NOTE: Time is a 24-hour clock.
01/01/2009
12:00:00
Control Commands from Serial
Port [Enabled] [Disabled]
If Enabled, control commands are accepted through
the serial port, USB ports, or option card.
If Disabled, configuration and load control
commands are restricted to LCD only.
Enabled
Output Voltage [200V] [208V] [220V] [230V] [240V]
[Auto-sensing] Auto-sensing
Output Frequency [50Hz] [60Hz] [Auto-sensing] Auto-sensing