Denon DVD-3930CI User Manual

Page 33

Advertising
background image

Other settings

Other settings

ENGLISH

30

ENGLISH

¢ When the signal format is set to “PC RES.”:

VGA (Upon purchase):
The signal is converted to a resolution of 640 x 480 (60 Hz).

XGA:
The signal is converted to a resolution of 1024 x 768 (60 Hz).

WXGA:
The signal is converted to a resolution of 1280 x 768 (60 Hz).

SXGA:
The signal is converted to a resolution of 1280 x 1024 (60 Hz).

• The image size changes when keystone correction is performed.
• The “KEYSTONE” indicator on the front panel lights when keystone

correction is set.

Performing keystone correction in the vertical
direction

Performing keystone correction in the horizontal
direction

Performing keystone correction

Keystone distortion occurs when the connected projector or screen is
at an angle. If so, correct.

Valid for progressive and HDMI outputs.

When turned clockwise:

When operating from the remote control unit:

Use

[HDMI FORMAT]

and select the resolution.

When operating from the main unit :

q

q

Turn

<VIDEO MODE>

to display “HDMI SELECT” on

the display, then press

<VIDEO MODE>

.

w

w

Turn

<VIDEO MODE>

and select the resolution, then

press

<VIDEO MODE>

.

Turn

<VIDEO MODE>

to display “KEYSTONE-H” on

the display, then press

<VIDEO MODE>

.

1

Turn

<VIDEO MODE>

to select the amount of

correction, then press

<VIDEO MODE>

.

The setting can be set to between –40 and +40.

2

When turned counterclockwise:

Turn

<VIDEO MODE>

to display “KEYSTONE-V” on

the display, then press

<VIDEO MODE>

.

1

Turn

<VIDEO MODE>

to select the amount of

correction, then press

<VIDEO MODE>

.

The setting can be set to between –30 and +30.

2

When turned clockwise:

When turned counterclockwise:

NOTE:
• The greater the amount of keystone correction, the greater the

loss of picture quality. For good picture quality, set the devices so
that the correction value can be kept to the minimum.

• The keystone correction is not reflected in the video output until the

<VIDEO MODE> is pressed to set it. To fine-adjust, repeat step

2

within

3 seconds of pressing <VIDEO MODE>.

Advertising