Denon DVD-3930CI - Manual (Page 34)

Other settings Other settings
ENGLISH
31
ENGLISH
[ D H F G]
[ ENTER ]
[ PICTURE ADJUST]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Adjusting the picture quality
Storing the picture quality settings in the
memory
Press [PICTURE ADJUST] .
Use [F F G G] to select one of memory positions “M1” to
“M5”, then press [ENTER] .
1
2
Use [F F G G] to select one setting from “Adjust 1” to
“Adjust 4”.
For instructions on making “Adjust 4”, see “Gamma correction”
(
page 33).
3
Press [H H] , use [F F G G] again to select the item to be
adjusted, use [D D H H] to adjust, then press [ENTER] .
• The settings are stored at the corresponding memory position.
4
Use this procedure to store picture quality settings you have adjusted
to suit your tastes at memory positions 1 to 5.
1
2
3
4
¢ To quit the picture quality adjustment mode:
Press [PICTURE ADJUST] again.
When “M1“ is selected
When ”Adjust 2”
is selected
When “CONTRAST“ is selected
Audio synchronization adjustment procedure
Use this procedure to set so that the video signal output method’s
video signal set at “AV Sync” (
page 21) under “Making the initial
settings” and the audio signal are synchronized.
Turn <VIDEO MODE> to display “AUDIO ADJUST” on
the display, then press <VIDEO MODE> .
1
Turn <VIDEO MODE> to select the time by which the
sound is to be delayed, then press <VIDEO MODE> .
The setting can be made between 0 and +200 msec in units of
10 msec. (The higher the value, the greater the delay of the
sound with respect to the picture.)
2
<VIDEO MODE>