SONOSAX SX-VT Quick_Start - Manual (Page 10)

SONOSAX SX-ST RECORDER Quick Start Guide Page 10 of 26
Another example of configuration
Inputs modulometers
1 to 6 are dimmed = input channels are not routed or
tracks are not armed (will not be recorded)
7 & 8 brightened = channels 7 & 8 routed on armed
tracks (will be recorded)
TOUCH THE LOWER REGION TO TOGGLE THE
METERING OF RECORDER'S TRACKS
3.5 TRACKS MODULOMETERS
Multiple inputs can be routed (mixed) on the same track; thus when the screen displays the modulometers of
the recorder's TRACKS, each track represents the sum of all assigned inputs on that particular track, in other
words it shows what is effectively recorded on the tracks.
If the Inputs are not assigned on a 1:1 routing, toggling the metering allows a rapid comparison between the
modulation level of the channels and the modulation level of the recorded tracks.
Recorder's Track modulometers
Input 7 & 8 used as main Mix-L & Mix-R are assigned
on tracks 1 & 2 on the H.D. and on tracks A & B on the
CF Card
TOUCH THE LOWER REGION TO TOGGLE THE
METERING OF INPUT CHANNELS
Recorder Track modulometers
Typical 1:1 assignment of input channels onto recorder's
track. In this example, tracks A & B of the CF Card are
not assigned and not armed
TOUCH THE LOWER REGION TO DISPLAY THE
METERING OF THE INPUT CHANNELS