SONOSAX SX-ES64 - Manual (Page 22)

User manual SONOSAX SX-ES64 Page 22 of 27
7.1.2 Optional connectors [OPTION]
An optional connector can be installed for direct connection to a camera with a confidence return monitoring
for example. By default, these connectors provide with the Main outputs 1 &2 and the confidence return
monitor is internally wired to the [EXT] position of the monitoring selectors (see chapter 5.4)
A choice of connectors is available such as Tajimi 12 pin or Hirose 10 pin.
The wiring of these connectors is compatible with existing cables that the user may already have purchased
with mixers of other brand. Other type of connectors are available on request.
HIROSE 10 PIN Compatible with: Audio Development / SQN / SOUND DEVICES / COOPER / MIXY
RM15TRD-10S Mating cable connector: RM15TPD-10P
1 => MAIN Out 1 Hi +
2 => MAIN Out 1 Lo -
3 => MAIN Out 2 Hi +
4 => MAIN Out 2 Lo -
5 => Return RIGHT Hi+ ( connected to EXT on Monitor selector )
6 => Return RIGHT Lo - or Gnd if unballanced
7 => Return LEFT Hi+
( connected to EXT on Monitor selector )
8 => Return LEFT Lo - or Gnd if unbalanced
9 => GND
10
=> GND
TAJIMI 12 PIN Compatible with: SQN / Mixy / Sony
PRC 05R 12F Mating cable connector: PRC05P12M
A => MAIN Out 1 Hi +
B => MAIN Out 1 Lo -
C => MAIN Out 2 Hi +
D => MAIN Out 2 Lo -
E => Return LEFT Hi+
( connected to EXT on Monitor selector )
F => Return LEFT Lo - or Gnd if unballanced
G => Return RIGHT Hi+ ( connected to EXT on Monitor selector )
H => Return RIGHT Lo - or Gnd if unballanced
J => GND
K => GND
L => n.c.
M => n.c.