Sundance SMT310 v.1.6 User Manual
Smt310, User manual v1.6
Advertising
Table of contents
Document Outline
- 1
- 1 Introduction
- 1
- 2 Functional Description
- 1
- 3 Setting Up the SMT310
- 1
- 4 Memory Map
- 1
- 5 DSP Resource Memory Map
- 1
- 6 Shared Memory Resource
- 1
- 7 Sundance Digital Bus (SDB)
- 1
- 8 ComPorts
- 1
- 9 ComPort to PCI Interface
- 1
- 10 JTAG Controller
- 1
- 11 Using the SMT310 External/Internal JTAG with TI Tools.
- 1
- 12 Firmware Upgrades
- 1
- 13 Global/Local Bus Transfers, DSP <-> PCI.
- 1
- 14 Interrupts
- 14.1 SMT310-To-PCI Interrupts
- 1.1
- 14.2 PCI-To-SMT310 Interrupts
- 14.3 Interrupt Registers
- 14.3.1 PCI Interrupt Configuration Register(Offset 0x4C, BAR0)
- 14.3.2 PCI Interrupt Status Register(Offset 0x48, BAR0)
- 14.3.3 Local Bus Interrupt Mask Register(Offset 0x77, BAR0)
- 14.3.4 Local Bus Interrupt Status Register(Offset 0x76, BAR0)
- 14.3.5 PCI Mailbox WRITE/READ Interrupt Control Register(Offset: Write 0xD0, BAR0 Read 0xD2, BAR0)
- 14.3.6 Local Bus Mailbox WRITE/READ Interrupt Control Register(Offset: Write 0xD4, BAR0 Read 0xD6, BAR0)
- 1.1.1
- 14.3.7 Mailbox Write/Read Interrupt Status Register(Offset: Write 0xD8, BAR0 Read 0xDA, BAR0)
- 14.3.8 INTREG Register(Offset 0x40, BAR1)
- 14.4 Example
- 1
- 15 Performance Figures
- 1
- 16 Mechanical Dimensions
- 17 Power consumption
- 1
- 18 Cables and Connectors
- 19 Where’s that Jumper?