Super Systems CAT-100 - Manual (Page 18)

CAT-100 Operations Manual
Super Systems Inc. Page 18 of 51
Figure 20 - Probe data entry
• Enter date and time of test (Figure 21). This screen contains buttons allowing you to
enter the Year, Month, Day, Hour, and Minute of the test. You may also accept the default
values shown. When finished entering values, press
↵
to continue.
Figure 21 - Entry of date and time of test
The screen will read “Test Saved!” (see Figure 22) when the test data has been saved. A
summary of the data saved will then be shown (Figure 23) before the main menu is again
displayed.
Figure 22 - "Test Saved!" initial screen Figure 23 - "Test Saved!" summary screen
Once the data has been saved appropriately, remove the wire coil from the binding posts.
Discard the wire coil in a proper manner. To prevent errors in test results, it is important not to
reuse a coil that has already been used.