SVSi N6123 NVR User Manual
N6123 nvr quick start
 
N6123 NVR QUICK START
N6123 NVR QUICK START
The N6123 Network Video Recorder (NVR) is designed to record over 400 hours of video-over-IP stream. The unit can 
record from any SVSi Encoder (N1000, N2000, N3000, or V-Series) and uses any SVSi Decoder in the same series for 
playback. Recordings can be converted to .mp4 or .mov files for easy transfer to other systems. 
The N6123 recording and playback durations reflect 
the compression capabilities of the Encoder/
Decoder used. For example, the economical N1000 
Series is an in-room solution and offers no 
compression, while the N3000 Series provides 
H.264 advanced video compression. 
Estimated recording times are as follows:
N1000: 4.5 hours (880 Mbps/uncompressed)
N2000: 43 hours (100 Mbps/JPEG 2000 
compressed) 
N3000: 434 hours (10 Mbps/H.264 compressed) 
Note: The 4K Ultra HD products (N2151/N2251) are 
supported in compressed mode only.
Note: To continue with the configuration steps on the back of this page, please download N-Able (SVSi’s free device 
manage software) at 
http://svsiav.com/support/resources/software
if you’ve not already done so.
The N6123 Network Video Recorder (NVR) is designed to record over 400 hours of video-over-IP stream. The unit can 
record from any SVSi Encoder (N1000, N2000, N3000, or V-Series) and uses any SVSi Decoder in the same series for 
playback. Recordings can be converted to .mp4 or .mov files for easy transfer to other systems. 
The N6123 recording and playback durations reflect 
the compression capabilities of the Encoder/
Decoder used. For example, the economical N1000 
Series is an in-room solution and offers no 
compression, while the N3000 Series provides 
H.264 advanced video compression. 
Estimated recording times are as follows:
N1000: 4.5 hours (880 Mbps/uncompressed)
N2000: 43 hours (100 Mbps/JPEG 2000 
compressed) 
N3000: 434 hours (10 Mbps/H.264 compressed) 
Note: The 4K Ultra HD products (N2151/N2251) are 
supported in compressed mode only.
Note: To continue with the configuration steps on the back of this page, please download N-Able (SVSi’s free device 
manage software) at 
http://svsiav.com/support/resources/software
if you’ve not already done so.