TE Technology TCA - Manual (Page 3)

TE
TECHNOLOGY, INC.
3/22
http://www.tetech.com email: [email protected]
This Thermoelectric Cooling Assembly (TCA) Instruction Manual must
be read and followed carefully before installation and operation.
!
Follow all recommendations and suggestions, heed all warnings contained in
this manual and use the product as intended. Failure to do so could result in
hazards and loss or damage to the TCA and/or secondary equipment.
!
Only qualified technicians should install and configure the TCA.
!
Use of the TCA is restricted to operators capable of understanding one of the
languages presented in this manual, as stated by agreement between TE
Technology, Inc. and the Purchaser.
!
The TCA is intended to be operated in a light industrial environment only.
!
Do not use in an explosive or potentially explosive environment.
!
Do not use the TCA if damaged.
!
Do not disassemble TCA. No user serviceable parts inside.
!
Do not operate the TCA outside the specified operating temperature range.
Condensation could form on cooled sections of the TCA and on secondary
equipment. This condensate and any subsequent drainage onto other secondary
equipment could pose hazards and/or damage to the TCA and/or secondary
equipment. If such hazards are present, devices should be added to prevent or
remove the condensate such as dehumidifiers, dry gas purge systems,
desiccants, etcetera. Alternatively, cooled sections of the TCA and secondary
equipment should be restricted from being cooled below the dew-point
temperature.
Portions of the TCA could exceed 60 °C during normal operating
conditions resulting in a hazard. Use caution! Protect against contact with hot
surfaces.