TE Technology TC-48-20 - Manual (Page 3)

3
The TC‐48‐20 OEM is intended to be used with, or incorporated into, other machinery made by
TE Technology, Inc. and must not be put into service until the relevant machinery into which it is
to be incorporated into has been declared in conformity with the essential requirements of the
Machinery Directive 2006/42/EC.
For more information regarding protection devices read TE Technology’s Thermoelectric Cooling Assembly (TCA)
Instruction manual which is available for download from TE Technology's website at
www.tetech.com . The terms
and provisions relating to protection devices as provided in the TCA Instruction manual are herby incorporated by
reference. A copy of the TCA Instruction manual can also be sent via regular mail upon request.
TE Technology, Inc. does not make any warranty, expressed or implied, that the use or operation of the equipment
will be functional or effective if the equipment is not installed and used in accordance with this manual.
TE Technology, Inc. shall not be liable, and Purchaser shall defend, hold harmless, and indemnify TE Technology,
Inc. from and against, any losses, costs, expenses (including reasonable attorneys’ fees), injuries, liabilities or
damages of any kind or nature whatsoever, arising out of the use or inability to use this TE Technology, Inc.
product, from the omission or failure to use protection devices, or from failure to comply with this manual. This
provision is in addition to any other indemnification provisions which are a part of the Purchase Order or contract
with Purchaser.