Teac HA-501 User Manual
Page 9
9
EN
V
Do not turn the power on until after
making all connections.
o
Carefully read the manuals of the devices that
you are connecting and follow their instructions
when making connections.
o
Do not bundle connecting cables with power
cords. Doing so could cause noise.
o
Connect all plugs completely.
A
Analog audio input connectors (INPUTS)
These are two-channel analog audio input pairs.
Connect cassette decks, CD players and other devices
that output audio.
Connect the L connectors of this unit with the L
connectors of audio output devices. Connect the R
connectors of this unit with the R connectors of audio
output devices.
o
This unit's XLR connectors are pin 2 “hot”.
Use commercially available cables to make the
connections.
XLR:
Balanced XLR cables
LINE 1:
RCA audio cable
LINE 2:
RCA audio cable
B
LEVEL switch
Set the level of the audio output from the analog
audio output connectors (LINE OUT).
FIX:
Output the same level as input.
VARI:
Output according to the VOLUME knob
setting.
OFF:
No output.
C
Analog audio output connectors
(LINE OUT)
These are a two-channel analog audio output pair.
Connect these to an amplifier or other device with
audio inputs.
Use commercially available cables to make the
connections.
White (L)
Red (R)
White (L)
Red (R)
D
Power inlet (~IN)
Insert the included power cord here. After complet-
ing all other connections, insert the power plug into a
power outlet.
Unplug the cord from the outlet when not using the
unit for a long time.
V
Use only the included power cord. Use of a differ-
ent cord could cause fire or electric shock.