Teac SL-D920 - Manual (Page 16)

16
< Do NOT use high-capacity USB hard discs with this
unit.
1 Press the FUNCTION button to select “USB”.
3
Press the PLAY/PAUSE ( y/J) button to start
playback.
Playback starts from the first file on the USB memory.
2 Plug your USB memory into the USB connector.
< You can reverse steps 1 and 2 .
Total number of files Total number of folders
Suspending playback temporarily
(pausing)
Skipping to the next or previous track/file
Press the PLAY/PAUSE ( G/J) button during playback
to stop playback at the current position. To resume
playback, press the PLAY/PAUSE (
G/J) button again.
Stopping playback
Press the STOP button (
H) to stop playback.
During playback, press a SKIP (
. or /) button
repeatedly until the desired track/file is found. The
selected track/file will be played from the beginning.
When the unit is stopped, press a SKIP ( . or /)
button repeatedly until the desired track/file is found.
Press the PLAY/PAUSE (
G/J) button to start playback
from the selected track/file.
< If the . button is pressed during playback, the
current track/file will be played from the beginning. To
return to the beginning of the previous track/file, press
the
. button twice.
< During programmed playback, press the . or /
button to play the next or previous track/file in the
program.
INFO
< The unit takes a few seconds to load USB memory. No
buttons will work during loading. Wait until the total
number of the files and the total number of folders
on the USB memory are displayed.
When USB memory is loaded
< MP3/WMA files not stored in folders are automatically
treated as being in the “ROOT” folder, and playback
starts from the first file in the ROOT folder.
< When playback of all the files has finished, the unit
stops automatically.
Listening to MP3/WMAs (USB) Controlling playback (disc/USB)