Teac CD-01U Quick Start - Manual

1
Basic playback
1. Press the POWER switch to turn on the unit.
2. Insert a disc to the disc slot.
3. Press the ¥/π key on the front panel or
¥ PLAY key on the remote control unit.
The unit starts playback from track 1.
• To pause playback
Press the ¥/π key on the front panel or
π READY key on the remote control unit.
• To stop playback
Press the ·key on the front panel or
· STOP key on the remote control unit.
• To eject the disc
Press the EJECT key on the front panel or
remote control unit.
Selecting a track
From the front panel, use the SKIP keys.
From the remote control unit, use the SKIP keys
or the numeric keys.
To select a track using the numeric keys, specify
the desired track number in two digits for an
audio CD or in three digits for an MP3 disc. To
specify track 4 of an audio CD, for example,
press 0 followed by 4 .
Searching the desired position
During playback (or paused), use the SEARCH
keys to move forwards or backwards while
monitoring the cueing sound.
Also, frame accurate jog search is possible by
pressing the
SHIFT key to turn on the indicator
and rotating the PITCH dial on the front panel, or
using the JOG (-,+) keys on the remote control
unit.
About the shift mode
Many of the front panel controls have shifted
(secondary) functions. You can use these
functions when the
SHIFT indicator is lit (i.e. in
the shift mode).
Pressing the
SHIFT key switches on or off of the
SHIFT indicator. Note that the illuminated SHIFT
indicator does not turn off until you press the
SHIFT key again.
Playback mode
The unit has four playback modes: normal
(continuous), single, program and random.
By pressing the PLAY MODE key on the remote
control unit, you can select the desired playback
mode.
You can also select the playback mode using the
front panel
CALL (PLAY MODE) key while the
SHIFT indicator is lit.
The currently selected mode is shown on the
display.
• Normal mode : no indication
• Single mode :
S
• Program mode: PROGRAM
• Random mode: RANDOM
* This quick start guide is written assuming that
the unit is in the normal playback mode except
as noted.
Playing back MP3 files
The unit can play back a disc containing MP3
files.
Note that some functions (such as A-B loop,
search, EOM, etc.) do not work with an MP3 file.
This Quick Start Guide describes the basic operations of the CD-01U CD player.
CD-01U/Professional Quick Start Guide »
Playable discs
The CD-01U can play back not only commercially available audio CD discs but also CD-R and CD-RW
discs. In addition, it can play back MP3 files on a CD-R/CD-RW disc.